Just a quicknote to advise all of my website at
http://www.uegpromotions.gq.nu  featuring the above subject matter. Also
available are Gift ideas, Gadgets, Gizmos such as the Forever Flashlight (no
batts, no windup) and the SIM Card backup/duplicator device.  Also have an
ebay shop incase anyones into auctions of said laptops etc etc.
Thanks for your time.

I had to get a Inspiron 6000 after killing my 5150 (poured tea on the
keyboard).  The problem is that tech support is totally unable(or
unwilling) to help me with partitioning this drive whereas they had no
reservations whatsoever in helping me with the 5150.  Because of old
legacy programs, I need to keep my drive configuration the same: C, D,
E, F and G.   The computer comes with three partitions, a basic FAT
partition of 55MB, then a basic NTFS partition of 33.64GB which
contains the C drive and finally a 3.55GB partition at the end.

What I would like to do is combine the last two partitions and
repartition them into my C, D, E, F and G drives.

1: Can I delete what Dell has on the 3.55GB third partition and recover
the space?

2: Can I then repartition it and the NTFS partition into what I need?

I’d hate to have to FDISK and reload WinXP and all the drivers since I
had a devil of a time when doing that with the 5150.  However, if all
else fails, can I do that and just leave the 55MB of FAT at the
beginning of the drive and have my own partitions after that?

Thanks for any help

Ron

Looking for the restore cd for this model laptop. Can be for either
windows 2000 or Win XP.  Anyone have one laying around? Copies of
originals acceptable.

i have a laptop from dell with 256 MB ddr memmory with two slots it
says it can be upgraded to 1 gb . does it mean i canot upgrade it
beyond that

Iam doing a project using the charon 2 and i have to find a data sheet
for the Serial to USB converter made by comfile but it doesnt appear on
their website anymore and the links i have been given to them on
lextronic.fr do not work, any help on finding the appropriate data
sheets would be greatly appreciated,
Regards,
Colm

A weird problem with my NX5000.

Once a day, it crashes after about 5 minutes of powering up. The
system just locks up, the display freezes, and the display is filled
with vertical black bands.

Any ideas???
Thanks

Winbook had a model called an Si, someone told me it was made for them by
FIC. I am not sure I believe it, but anyway I was wondering who did make it
for them? anyone know?
I also need a keyboard for same notebook a Winbook Si, if anyone has a
Winbook Si that is not worth fixing, but has a good keyboard and battery
(battery not absolutely nessessary, but need one of those too) I would be
willing to buy the notebook for a reasonable price. I have checked eBay and
can not find one that is damaged and being sold for parts, one with a bad
display would be a prime example of what I am looking for.
TIA
John
email johnaatalmanddotnet (remove at and replace with @ remove dot and
replace with .)

Does anyone know where I can get the driver for the USB2?

I don’t have the recovery disk.  (I know, I know, I don’t need the
lecture)

Thanks for the help in advance,

Regards,

Phil

We have an IBM T21 Thinkpad running Windows XP Professional which seems to
be overheating.

On startup, the CPU fan runs for a few seconds and then stops. This means
that the Thinkpad will run for about 15 – 20 minutes before the processor
overheats and shuts down, causing the Thinkpad to lock up.

The fan is o.k. because if you take it out and drive it from an external
power supply it will run quite happily.

In an attempt to cure this we have updated the Bios, installed the correct
configuration utility, installed the battery maximiser, the ACPI driver, the
updated power drivers for XP and the support files for XP. The fan still
doesn’t run.

We are now out of ideas, apart from the fact that it may be a problem with
the system board. Before we go through the time and expense of installing a
new board we were wondering if there was anything else that we  missed
because we can’t see the wood for the trees at the moment

http://www.want-to-be-sure.blogspot.com << Click On Link